Get all 14 · $49

Print Artwork Checklist for Customers

Use this checklist to review a customer’s print file before proofing or giving production the go-ahead.

Check trim size and sides against the order

Start with the approved job specification. Record the finished dimensions, orientation, sides, fold or cut requirements, and intended material. Open the supplied file and confirm what each page is meant to become. A business card front and back can look correct at a glance while the back is rotated the wrong way for the job. For a supplied PDF, ask which boxes represent the finished trim and artwork with bleed if the file does not make it obvious.

What to verify at intake
CheckCompare againstIf it fails
Trim size and sidesApproved order and templateConfirm dimensions and side order
Bleed and safe areaPrinter’s trim and safety rulesExtend backgrounds or move essential content
Effective PPIPlaced dimensions and source pixelsRequest a better original or change the crop
Fonts and colorPrinter’s PDF and color requirementsRe-export with the correct settings
Proof revisionCustomer’s approval recordHold production until the version matches

Measure effective resolution and check the export

Divide the image pixels by the inches it occupies on the finished piece. Check both axes when the proportions differ, then confirm the crop or border with the customer. A file’s metadata can display 300 DPI even when enlarging it in the layout reduces effective resolution. For PDF jobs, inspect placed images individually when you have the tools to do so. Text and logos may be vector elements, while a low-resolution photo inside the same PDF can still be a problem.

Zoom in around edges and small lettering. Check that backgrounds extend past trim wherever the design is meant to reach the edge. Verify that the expected fonts are embedded or handled as the printer specifies. Check the requested color profile and whether any spot colors, transparency, or special finishing instructions require separate handling. Confirm export settings with the actual shop before applying a generic preset.

Worked example for a two-sided postcard

A customer orders a finished 6 × 4 inch card with 0.125 inches of bleed per edge. The full artwork area is 6.25 × 4.25 inches. A 1,800 × 1,200 pixel image is 300 PPI at 6 × 4 inches. If that same source is scaled uniformly to fill the entire bleed area, the short axis controls the scale and effective resolution is about 282 PPI. The source height divided by 4.25 inches gives that figure.

If the shop requires 300 PPI across the full bleed area, the artwork needs at least 1,875 × 1,275 pixels, with appropriate proportions or crop. Request revised artwork, compare the front and back, and issue a new proof with an identifiable revision before release.

Common intake mistakes

Viewing a proof on a phone can hide small typography and resolution defects. A screenshot of a design discards information the production PDF may need. Keep the customer’s original, the file actually sent to print, and the customer’s approval by version. Adobe’s print-ready PDF guidance explains export settings to discuss with your printer.

Frequently asked questions

Can the DPI checker inspect embedded PDF fonts?

It checks raster pixel dimensions and print size. Inspect fonts and PDF-specific details separately with suitable prepress software.

Should I always request crop marks?

Ask the printer. Some want them on specific jobs, while automated workflows use the file’s trim information or their own marks.

Is a screenshot an acceptable proof?

Use a proof that shows the intended crop and trim and references the actual production file. Keep the approved file and approval response together.

What should happen after a customer changes the file?

Give the new file a new revision, repeat the relevant checks, and record a fresh approval before releasing it.